LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> RAV4 Adventure >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) - Service Information (1 Of 4) >> Hood >> Reassembly [10/2019 - ] >> Procedure

Reassembly [10/2019 - ]: Procedure

  1. INSTALL HOOD STAY HOLDER 
    1. Attach the claw and install the hood stay holder.
      GTY878708Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CONNECT WINDSHIELD WASHER HOSE 
    1. Attach the clamp and connect the windshield washer hose.
      GTY878722Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY 

    HINT: 

    Use the same procedure for the RH and LH sides.

    Refer to PROCEDURE - Step 1

  4. INSTALL HOOD INSULATOR 
    1. Attach the guide.
      GTY878723Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the hood insulator with the 6 new clips.
scientia non olet · About LEMON Manuals