LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Prius XLE >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Air Conditioning System (Service Information) (2 Of 2)) >> Humidity Sensor >> Removal [04/2018 - 08/2020] >> Procedure

Removal [04/2018 - 08/2020]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SENSOR COVER 
    1. Release the stopper by pulling it out as shown in the illustration.
      GTY866713Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Stopper
      Release
      Remove in this Direction
    2. Disconnect the air conditioning thermistor assembly with sensor cover from the windshield glass as shown in the illustration.
    3. Disengage the 2 claws and guide to remove the sensor cover.
      GTY924766Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE AIR CONDITIONING THERMISTOR ASSEMBLY 
    1. Disconnect the connector to remove the air conditioning thermistor assembly.
      GTY924765Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals