LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Prius XLE AWD-e >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> Combination Meter >> Reassembly [11/2015 -] >> Procedure

Reassembly [11/2015 -]: Procedure

  1. INSTALL METER CIRCUIT PLATE 
    1. Connect each connector as shown in the illustration.
      GTY571496Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
      NOTE:

      Be sure to connect the connector securely.

    2. Push down the 2 holders to engage the 4 claws as shown in the illustration.
      NOTE:

      Be sure to engage the claws securely.

    3. Engage the 4 guides and 4 claws to install the meter circuit plate.
      GTY568815Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 2 METER CIRCUIT PLATE 
    1. Engage the 4 guides as shown in the illustration.
      GTY558952Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    2. Install the No. 2 meter circuit plate with the 4 screws.
      GTY604254Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 2 COMBINATION METER CASE 
    1. Engage the 2 guides to install the combination meter multi-display to the No. 2 combination meter case as shown in the illustration.
      GTY549662Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    2. Engage the 2 guides and connect the connector to install the No. 2 combination meter case with combination meter multi-display as shown in the illustration.
      GTY563419Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
      NOTE:
      • Make sure to push the connector straight down when connecting it as it is easily damaged.
      • Make sure not to push the combination meter multi-display forcibly, or the connector may be damaged.
      • Be sure to connect the connector securely.
    3. Install the 2 screws.
      GTY555971Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Engage the 2 guides.
      GTY555968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Install the No. 2 combination meter case with the screw.
      GTY555972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO. 1 COMBINATION METER PLATE 
    1. Engage the 3 guides to install the No. 1 combination meter plate.
      GTY555973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL NO. 1 COMBINATION METER COVER 
    1. Engage the 10 claws.
      GTY566555Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the No. 1 combination meter cover with the 2 screws.
  6. INSTALL COMBINATION METER GLASS 
    1. Engage the 12 claws to install the combination meter glass.
      GTY603733Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the 9 bushes.
      GTY566554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals