LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Prius Prime Plus >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Battery Management Systems >> Hybrid Battery Control System - Service Information (2 Of 3) >> Charge Indicator >> Installation [09/2016 - ] >> Procedure

Installation [09/2016 - ]: Procedure

  1. INSTALL EV CHARGER LID INDICATOR ASSEMBLY 
    1. Install the EV charger lid indicator assembly to the battery charger connector opening lid sub-assembly with the 2 bolts.

      Torque: 2.0 N*m (20 kgf*cm, 18 in.*lbf) 

  2. INSTALL FUEL FILLER OPENING LID LOCK BRACKET 

    Refer to INSTALLATION [09/2016 - 05/2019] , or refer to INSTALLATION [05/2019 - 07/2020] , or refer to INSTALLATION [07/2020 - ]

scientia non olet · About LEMON Manuals