LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Prius LE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> HEADUP Display - Diagnostics - Introduction >> HEADUP Display System >> Terminals Of HEADUP Display System Ecu [11/2015 - 12/2018] >> Terminals Of Ecu [11/2015 - 12/2018]

Terminals Of Ecu [11/2015 - 12/2018]

  1. COMBINATION METER MIRROR ECU 
    GTY541456Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the voltage and resistance according to the value(s) in the table below.
      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      G7-1 (B) - Body ground G - Body ground Auxiliary battery Power switch off 11 to 14 V
      G7-2 (IG) - Body ground V - Body ground Power switch signal Power switch off Below 1 V
      Power switch on (IG) 11 to 14 V
      G7-4 (CANH) - Body ground P - Body ground CAN communication line - -
      G7-5 (CANL) - Body ground W - Body ground CAN communication line - -
      G7-6 (ES) - Body ground BR - Body ground Ground Always Below 1 Ω
      G7-7 (LCL+) - Body ground R - Body ground Local bus communication line - -
      G7-8 (LCL-) - Body ground V - Body ground Local bus communication line - -
      G7-11 (E) - Body ground SB - Body ground Ground Always Below 1 Ω
      G7-16 (SW1) - G7-6 (ES) BE - BR Headup display switch (No. 2 combination switch assembly) signal Power switch on (IG), headup display switch (No. 2 combination switch assembly) not pushed 4 to 6 V
      Power switch on (IG), headup display switch (No. 2 combination switch assembly) pushed Below 1 V
scientia non olet · About LEMON Manuals