LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Prius LE AWD-e >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Interior) - Service Information >> Room Light >> Removal [11/2015 -] >> Procedure

Removal [11/2015 -]: Procedure

  1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY 
    1. Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the No. 1 room light lens.
      GTY588310Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
      Front
    2. Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws as shown in the illustration to separate the No. 1 room light housing.
      GTY549124Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
      Front
      Remove in this Direction
    3. Disengage the clamp.
      GTY544852Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Room Light Switch Base
    4. Disengage the 4 claws to disconnect the room light switch base from the No. 1 room light housing.
  2. REMOVE NO. 1 ROOM LIGHT BULB 
    1. Remove the No. 1 room light bulb from the room light switch base.
scientia non olet · About LEMON Manuals