LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Power Distribution - Service Information >> Integration Relay >> Installation [06/2015 - 11/2018] >> Procedure

Installation [06/2015 - 11/2018]: Procedure

  1. INSTALL NO. 1 INTEGRATION RELAY 
    1. Connect the 3 connectors.
    2. Engage the claws as shown in the illustration and install the No. 1 integration relay.
      GTY586684Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
  2. INSTALL NO. 1 RELAY BLOCK COVER 
    1. Engage the claws as shown in the illustration and install the No. 1 relay block cover.
      GTY549342Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction (1)
      Install in this Direction (2)
  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 

    Refer to PROCEDURE - Step 2

  4. INSTALL LUGGAGE TRIM SERVICE HOLE COVER 

    Refer to PROCEDURE - Step 3

scientia non olet · About LEMON Manuals