LEMON Manuals: Even more car manuals for everyone

Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (2 Of 2) & Circuit Tests >> Electronically Controlled Brake System >> DTC C1442-44: Invalid Data Received from Acceleration Sensor; DTC C1443-34: Invalid Data Received from Yaw Rate Sensor [06/2015 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:

When replacing the yaw rate and acceleration sensor (airbag ECU assembly), perform zero point calibration.

Refer to CALIBRATION [06/2015 - ]

scientia non olet · About LEMON Manuals