LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Int) - Service Information >> DOOR COURTESY LIGHT (for Rear Side) >> Removal [06/2015 - ] >> Procedure

Removal [06/2015 - ]: Procedure

  1. REMOVE COURTESY LIGHT ASSEMBLY 
    1. Apply protective tape as shown in the illustration.
      GTY555518Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A Passenger Side
      *B Driver Side
      Protective Tape
      Remove in this Direction (1)
      Remove in this Direction (2)
    2. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and guide as shown in the illustration.
    3. Disconnect the connector to remove the courtesy light assembly.
  2. REMOVE COURTESY LIGHT BULB 
    1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw.
      GTY598352Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Courtesy Light Housing
      *2 Courtesy Light Cover
      *a Protective Tape
      Remove in this Direction
    2. Remove the courtesy light housing with courtesy light cover as shown in the illustration.
    3. Remove the courtesy light cover as shown in the illustration.
      GTY576069Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    4. Remove the courtesy light bulb as shown in the illustration.
      GTY579170Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
scientia non olet · About LEMON Manuals