Customize Parameters [11/2018 - ]

CUSTOMIZE METER / GAUGE SYSTEM

Customizing with the Techstream

Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Customize Setting / Warning or Display.

Select the setting by referring to the table below.

NOTE:

Be sure to record the current value before customizing.

Warning

Tester Display	Description	Default	Setting	ECU
Driver Side Seatbelt Warning Buzzer	Function to turn on/off the seat belt warning buzzer	ON	0:OFF, 1:ON	Combination meter assembly
Front Passenger Side Seatbelt Warning Buzzer	Function to turn on/off the seat belt warning buzzer	ON	0:OFF, 1:ON	Combination meter assembly
Rear Seatbelt Warning Buzzer	Function to turn on/off the seat belt warning buzzer	ON	0:OFF, 1:ON	Combination meter assembly
Reverse Buzzer	Function to change the Reverse Buzzer.	Continual	00:Continual, 01:Single	Combination meter assembly
Flasher Sound Volume Adjustment	Function to change the flasher sound volume	Medium	10:Large, 00:Medium, 01:Small	Combination meter assembly
Lane Change Flashing Times Setting	Function to set the number of lane change flashes	3	00:OFF, 01:3, 10:5, 11:7	Combination meter assembly

Display

Tester Display	Description	Default	Setting	ECU
ODO Display Time After IG OFF Setting	Function to change the ODO display time after the power switch is turned off	30s	00:30s, 01:60s, 10:600s, 11:OFF	Combination meter assembly

Customizing with the combination meter assembly

Turn the power switch on (IG).
Enter the following menus: Settings.

Select the setting by referring to the table below.

NOTE:

Be sure to record the current value before customizing.

SETTINGS

Display	Detail		Description	Setting	ECU
RSA	Notification Method	Excess Speed	Excess speed notification method setting	No Notification/Only Visual/Visual & Audible	Combination meter assembly
		No overtaking	No overtaking notification method setting	No Notification/Only Visual/Visual and Haptic
		Other Signs	Others traffic sign notification method setting	No Notification/Only Visual/Visual & Audible
	Notification Level		Excess speed notification level setting	- 5 km/h (- 3 MPH), 5 km/h (3 MPH), 10 km/h (5 MPH)
Maintenance System	Ion Filter		Resets the ion filter replacement period	Initialize	Combination meter assembly
Maintenance System	TPMS		Tire pressure warning system initialization	Set Pressure	Combination meter assembly
Language	-		Display language setting	*A	Combination meter assembly
Pop-up Display On / Off	Route Guidance		Enables or disables a popup screen while the navigation system displays a route	ON/OFF	Combination meter assembly
Pop-up Display On / Off	Instrument Panel Light		Changes between rheostat interrupt display / no display when operating the light control rheostat	ON/OFF	Combination meter assembly
Initialization	-		Setting are restored to factory shipping condition	Yes/No	Combination meter assembly
Simple / Split screen Switching	-		Switches main display between simple and split screen	Simple/Split	Combination meter assembly
Record Reset	Monthly Fuel Consumption		Resets the monthly average fuel consumption history in the drive information tab / fuel consumption history	Clear	Combination meter assembly
	Eco Diary (Monthly)		Screen is set to blank (no display)	Clear	Combination meter assembly
	Eco Diary (Daily)		Screen is set to blank (no display)	Clear	Combination meter assembly
Calendar	-		Sets the date	Set	Combination meter assembly
Screen Off	-		Screen is set to blank (no display)	ON/OFF	Combination meter assembly

*A: Content differs depending on destination market

HINT:

Depending on the specifications of the vehicle, some items may not be displayed.