LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - Service Information >> Cooling Fan Motor >> Removal [11/2018 - ] >> Procedure

Removal [11/2018 - ]: Procedure

  1. REMOVE FC RADIATOR ASSEMBLY 

    Refer to REMOVAL [11/2018 - ] 

  2. REMOVE COOLING FAN WITH CONTROLLER MOTOR 
    1. For Fan Side:
      1. Remove the 3 screws and fan from the fan shroud.
        GTY565145Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Remove the 5 screws and cooling fan with controller motor from the fan shroud.
        GTY565151Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        NOTE:

        If the cooling fan with controller motor has been struck or dropped, replace it.

    2. For No. 2 Fan Side:
      1. Remove the 3 screws and No. 2 fan from the fan shroud.
        GTY603424Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Remove the 5 screws and cooling fan with controller motor from the fan shroud.
        GTY565154Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        NOTE:

        If the cooling fan with controller motor has been struck or dropped, replace it.

scientia non olet · About LEMON Manuals