LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Meter / Gauge System - Diagnostic Codes & Symptom Tests >> Meter / Gauge System >> Speed Signal Circuit [06/2015 - 01/2018] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • When replacing the combination meter assembly, make sure to replace it with a new one.
  • If the DCM (telematics transceiver) has been replaced, perform the DCM activation procedure using the Techstream (w/ Manual [SOS] Switch).
  • Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed.
scientia non olet · About LEMON Manuals