Meter Illumination is Always Dark [06/2015 - ]: Procedure

1. Check for DTCs.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2015 - 11/2018] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ]

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2015 - 11/2018]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ] 

Result: 

OK 

See step  2

1. Check for DTCs.

   Refer to DTC CHECK / CLEAR [06/2015 - 11/2018] , or refer to DTC CHECK / CLEAR [11/2018 - ]

   Body Electrical > Main Body > Trouble Codes 

   Result

   Result	Proceed to
   DTC B1244 is not output.	A
   DTC B1244 is output.	B

Result: 

B 

GO TO DTC B1244. Refer to  DTC B1244: Light Sensor Circuit Malfunction [06/2015 - ] 

Result: 

A 

See step  3

1. Replace the combination meter assembly.

   Refer to REMOVAL [06/2015 - 11/2018] , or refer to REMOVAL [11/2018 - ]

   OK

   The operation of the combination meter assembly returns to normal.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END (COMBINATION METER ASSEMBLY IS DEFECTIVE) 

Result: 

NG 

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to  REMOVAL [06/2015 - 11/2018]  , or refer to  REMOVAL [11/2018 - ]