LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Axle And Differential - Service Information >> Rear Axle Hub >> On-Vehicle Inspection [06/2015 - 11/2018] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • When removing or installing the front disc brake caliper assembly, pushing back the disc brake piston may cause a large clearance between the brake pads and brake disc. When the brake pedal is depressed with a large clearance between the brake pads and the brake disc, DTCs C1214 related to abnormal brake fluid pressure may be stored. Make sure to clear DTCs after performing this step.
  • While the auxiliary battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch turns on. Therefore, when servicing the brake system components, do not operate the brake pedal or open/close the doors while the auxiliary battery is connected.

HINT: 

scientia non olet · About LEMON Manuals