LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Brakes >> Parking Brake System >> Parking Brake System - Service Information >> Parking Brake Switch >> Installation [06/2015 - ] >> Procedure

Installation [06/2015 - ]: Procedure

  1. INSTALL PARKING BRAKE SWITCH ASSEMBLY 
    1. Install the parking brake switch assembly to the parking brake control pedal assembly with the screw.

      Torque: 3.2 N*m (33 kgf*cm, 28 in.*lbf) 

  2. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY 

    Refer to INSTALLATION [06/2015 - ] 

scientia non olet · About LEMON Manuals