LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (1 Of 2) >> Electronically Controlled Brake System >> DTC C1249-49: Open in Stop Light Switch Circuit [06/2015 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.

    Refer to INITIALIZATION [06/2015 - ]

  • Inspect the fuses for circuits related to this system before performing the following procedure.
scientia non olet · About LEMON Manuals