LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (1 Of 2) >> Electronically Controlled Brake System >> DTC C1247-47: Stroke Sensor Malfunction; DTC C1346-71: Stroke Sensor Zero Point Learning Malfunction (Test Mode DTC); DTC C1392-48: Stroke Sensor Zero Point Calibration Undone [06/2015 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:

When replacing the skid control ECU (brake booster with master cylinder assembly) or brake pedal stroke sensor assembly, perform initialization and calibration of the linear solenoid valve.

Refer to INITIALIZATION [06/2015 - ]

HINT: 

Check the condition of each related circuit connector before troubleshooting.

Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE [06/2015 - ]

scientia non olet · About LEMON Manuals