LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (1 Of 2) >> Electronically Controlled Brake System >> DTC C1203-95: ECM Communication Circuit Malfunction [06/2015 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.

    Refer to INITIALIZATION [06/2015 - ]

  • When replacing the yaw rate and acceleration sensor (airbag ECU assembly), perform zero point calibration.

    Refer to CALIBRATION [06/2015 - ]

  • Recognition code registration is necessary when replacing the main body ECU (multiplex network body ECU).

    If the main body ECU (multiplex network body ECU) is replaced, refer to Registration.

    Refer to REGISTRATION [06/2015 - ]

scientia non olet · About LEMON Manuals