LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (1 Of 2) >> Electronically Controlled Brake System >> DTC C1202-68: Master Reservoir Level Malfunction [06/2015 - ] >> Description

DTC C1202-68: Master Reservoir Level Malfunction [06/2015 - ]: Description

When a fluid level drop in the brake master cylinder reservoir assembly is detected, a signal is sent to the skid control ECU (brake booster with master cylinder assembly).

If a DTC for the fluid level drop is stored, the warning will be canceled and the DTC will be cleared when the fluid level returns to normal.

DTC No. Detection Item INF Code DTC Detection Condition Trouble Area Note
C1202/68 Master Reservoir Level Malfunction 371
-
  • INF Code: 371
    • An open is detected in the switch signal circuit for 2 seconds or more.
  • INF Code: -
    • The reservoir level remains low.
  • INF Code: 371
    • Brake fluid level warning switch (Brake master cylinder reservoir assembly) internal open circuit
    • Open in wire harness
    • Skid control ECU (Brake booster with master cylinder assembly)
  • INF Code: -
    • Low brake fluid level
    • Brake fluid leaks
    • Brake fluid level warning switch (Brake master cylinder reservoir assembly) internal short circuit
    • Short in wire harness
    • Brake disc rotor excessive wear
    • Skid control ECU (Brake booster with master cylinder assembly)
Electronically controlled brake system DTC