Removal [06/2015 - 11/2018]: Procedure
- REMOVE FRONT SEAT ASSEMBLY
Refer to REMOVAL [06/2015 - 11/2018]
- REMOVE FRONT SEAT LEG COVER
See step 6
- REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD
See step 7
- REMOVE FRONT SEAT CUSHION SHIELD
See step 10
- REMOVE FRONT INNER SEAT CUSHION SHIELD
See step 13
- DISCONNECT FRONT SEAT BACK BOARD SUB-ASSEMBLY
See step 14
- REMOVE FRONT SEAT WIRE RH (for Front Passenger Side)
- DISCONNECT FRONT SEAT WIRE
- REMOVE FRONT SEAT BACK BOARD SUB-ASSEMBLY
See step 20
- REMOVE FRONT SEAT HEADREST SUPPORT
See step 21
- REMOVE FRONT SEATBACK HEATER ASSEMBLY (FRONT SEATBACK WITH COVER PAD)
- Remove the 2 nuts to disconnect the 2 front seatback cover brackets.
- Pull out the rear end portion of the front seatback heater assembly (front seatback with cover pad) in the direction indicated by the arrows (1) in the illustration.
Remove in this Direction (1) Remove in this Direction (2) - Lift up in the direction indicated by the arrows (2) in the illustration to remove the front seatback heater assembly (front seatback with cover pad).
- Remove the front seatback protector.
- Remove the 2 nuts to disconnect the 2 front seatback cover brackets.