LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> (Doors / Hatch) - Service Information >> Luggage Electrical Key Switch >> Inspection [06/2015 - ] >> Procedure

Inspection [06/2015 - ]: Procedure

  1. INSPECT LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY 
    1. Check the resistance.
      GTY579155Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Luggage Compartment Door Opening Switch Assembly)
      *b Open Switch
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        2 - 3 Switch off (Not pressed) 10 kΩ or higher
        Switch on (Pressed) Below 1 Ω
        1. If the result is not as specified, replace the luggage compartment door opening switch assembly.
scientia non olet · About LEMON Manuals