Smart Key System (For Start Function) - Diagnostic Codes & Symptom Tests

• SMART KEY SYSTEM (for Start Function)
  • DTC B2271: Ignition Hold Monitor Malfunction [06/2015 - ]
    • Description
    • Wiring Diagram
    • Caution / Notice / Hint
    • Procedure
  • DTC B2274: ACC Monitor Malfunction [06/2015 - ]
    • Description
    • Wiring Diagram
    • Caution / Notice / Hint
    • Procedure
  • DTC B2275: STSW Monitor Malfunction [06/2015 - ]
    • Description
    • Wiring Diagram
    • Caution / Notice / Hint
    • Procedure
  • DTC B2277: Detecting Vehicle Submersion [06/2015 - ]
    • Description
    • Caution / Notice / Hint
    • Procedure
  • DTC B2282: Vehicle Speed Signal Malfunction [06/2015 - ]
    • Description
    • Wiring Diagram
    • Caution / Notice / Hint
    • Procedure
  • DTC B2284: Brake Signal Malfunction [06/2015 - ]
    • Description
    • Wiring Diagram
    • Caution / Notice / Hint
    • Procedure
  • DTC U0103: Lost Communication with Gear Shift Module "A"; DTC U0129: Lost Communication with Skid Control ECU; DTC U0140: Lost Communication with Main Body ECU; DTC U0142: Lost Communication with Main Body ECU; DTC U0155: Lost Communication with Combination Meter; DTC U0293: Lost Communication with EV Control System; DTC U1117: Lost Communication with Accessory Gateway [06/2015 - ]
    • Description
    • Caution / Notice / Hint
    • Procedure
  • Power Source Mode does not Change to ON (IG and ACC) [06/2015 - ]
    • Description
    • Wiring Diagram
    • Caution / Notice / Hint
    • Procedure
  • Power Source Mode does not Change to ON (IG) [06/2015 - ]
    • Description
    • Wiring Diagram
    • Caution / Notice / Hint
    • Procedure
  • Power Source Mode does not Change to ON (ACC) [06/2015 - ]
    • Description
    • Wiring Diagram
    • Caution / Notice / Hint
    • Procedure
  • Power Source Mode does not Change to ON (READY) [06/2015 - ]
    • Description
    • Wiring Diagram
    • Caution / Notice / Hint
    • Procedure