LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Immobiliser System - Diagnostic Codes & Symptom Tests >> Immobilizer System >> DTC B2790: ID BOX EEPROM Malfunction [06/2015 - ] >> Description

DTC B2790: ID BOX EEPROM Malfunction [06/2015 - ]: Description

When an internal malfunction occurs in the ID code box (immobilizer code ECU), the certification ECU (smart key ECU assembly) stores this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
B2790 ID BOX EEPROM Malfunction An internal malfunction occurs in the ID code box (immobilizer code ECU) (EEPROM access malfunction). (1 trip detection logic*)
  • ID code box (immobilizer code ECU)
  • Certification ECU (smart key ECU assembly)
DTC output confirmation operation:
  1. An immobilizer set/unset operation is performed (the power switch is turned off or on (IG) while the key is being carried).
  1. *: Only output while a malfunction is present.
VEHICLE CONDITION AND FAIL-SAFE OPERATION WHEN MALFUNCTION DETECTED

Vehicle Condition when Malfunction Detected Fail-safe Operation when Malfunction Detected
  • Hybrid control system starting: Hybrid control system cannot be started next time
  • Hybrid control system stopped: Hybrid control system cannot be started
-
RELATED DATA LIST AND ACTIVE TEST

DTC No. Data List and Active Test
B2790 -