LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Int) - Service Information >> Rear Door Courtesy Switch >> Inspection [06/2015 - ] >> Procedure

Inspection [06/2015 - ]: Procedure

  1. INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY 
    1. Check the resistance.
      GTY583723Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear Door Courtesy Light Switch Assembly)
      *b Switch Body
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        1 - Switch body Not pushed Below 1 Ω
        Pushed 10 kΩ or higher

        If the result is not as specified, replace the rear door courtesy light switch assembly.

scientia non olet · About LEMON Manuals