LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Monitor - Service Information >> Clearance Warning Ecu >> Removal [06/2015 - 11/2018] >> Procedure

Removal [06/2015 - 11/2018]: Procedure

  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY 

    Refer to REMOVAL [06/2015 - 11/2018]

  2. REMOVE CLEARANCE WARNING ECU ASSEMBLY 
    1. Disconnect the connector.
      GTY551981Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt.
      GTY600491Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the guide to remove the clearance warning ECU assembly.
scientia non olet · About LEMON Manuals