LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio / Video System - Service Information >> Front Door Speaker >> Inspection [06/2015 - ] >> Procedure

Inspection [06/2015 - ]: Procedure

  1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY 
    1. Visually check the front No. 1 speaker assembly.

      OK

      The cone paper of the front No. 1 speaker assembly is not torn.

    2. Check the resistance.
      GTY596556Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Front No. 1 Speaker Assembly)
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        1 - 2 Always Approximately 4.1 to 4.3 Ω

        If the result is not as specified, replace the front No. 1 speaker assembly.

scientia non olet · About LEMON Manuals