DTC U023A: Lost Communication With Image Processing Module "A" [11/2018 - ]: Procedure

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [06/2015 - ]

   Body Electrical > Main Body > Clear DTCs 

2. Turn the power switch on (IG) and wait for at least 10 seconds or more.
3. Check for DTCs.

   Refer to DTC CHECK / CLEAR [06/2015 - ]

   Body Electrical > Main Body > Trouble Codes 

   OK

   DTC U023A is not output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ] 

Result: 

NG 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ]