Repair [06/2015 - ]: Procedure
- INSPECT WINDOW GLASS ANTENNA WIRE
- When measuring resistance, wrap a piece of aluminum foil around the tip of the negative probe and press the foil against the wire with your finger as shown in the illustration.
*a Tester Probe *b Aluminum Foil *c Defogger Wire - When cleaning the glass, wipe it in the direction of the wire with a soft dry cloth. Take care not to damage the wire.
- Do not use detergents or glass cleaners with abrasive ingredients.
- Check for continuity at the center of each antenna wire as shown in the illustration.
- When measuring resistance, wrap a piece of aluminum foil around the tip of the negative probe and press the foil against the wire with your finger as shown in the illustration.
- REPAIR WINDOW GLASS ANTENNA WIRE