LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Lin Communication System - Diagnostic Codes & Symptom Tests >> Lin Communication System >> DTC B2786: No Response from Steering Lock ECU [06/2015 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • When using the Techstream with the power switch off to troubleshoot:

    Connect the Techstream to the vehicle, and turn a courtesy light switch on and off at 1.5 second intervals until communication between the Techstream and vehicle begins.

  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.
  • If the certification ECU (smart key ECU assembly) or transmission control ECU assembly is replaced, refer to Registration.

    Refer to REGISTRATION [06/2015 - ]

HINT: 

When the communication between the transmission control ECU assembly and certification ECU (smart key ECU assembly) stops, DTC B2785 is also stored.

scientia non olet · About LEMON Manuals