Caution / Notice / Hint

NOTE:

When using the Techstream with the power switch off to troubleshoot:
Connect the Techstream to the vehicle and turn a courtesy light switch on and off at 1.5 second intervals until communication between the Techstream and vehicle begins.
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
When the front power window regulator motor assembly is removed and reinstalled or replaced, the front power window regulator motor assembly must be initialized.
Refer to INITIALIZATION [06/2015 - ]
If the main body ECU (multiplex network body ECU) is replaced, refer to the Registration.
Refer to REGISTRATION [06/2015 - ]

HINT:

DTC B2325 is output when the communication between all of the following components and main body ECU (multiplex network body ECU) stops.