LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can Communication System - Diagnostic Codes & Circuit Tests >> Can Communication System >> DTC U1110: Lost Communication with Clearance Sonar Module [06/2015 - 11/2018] >> Description

DTC U1110: Lost Communication with Clearance Sonar Module [06/2015 - 11/2018]: Description

DTC No. Detection Item DTC Detection Condition Trouble Area Note
U1110 Lost Communication with Clearance Sonar Module No communication from the clearance warning ECU assembly continues.
  • Clearance warning ECU assembly branch line or connector
  • Power source circuit of clearance warning ECU assembly
  • Clearance warning ECU assembly ground circuit
  • Clearance warning ECU assembly
HINT: 
The network gateway ECU stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 2.

HINT: 

This diagnosis procedure is for when DTC U1110 is output by the network gateway ECU (Techstream display: Gateway).