LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Mirai >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can Communication System - Diagnostic Codes & Circuit Tests >> Can Communication System >> Clearance Warning ECU Communication Stop Mode [11/2018 - ] >> Description

Clearance Warning ECU Communication Stop Mode [11/2018 - ]: Description

Detection Item Symptom Trouble Area
Clearance Warning ECU Communication Stop Mode Either condition is met:
  • Communication stop for "Clearance Warning (Clearance Sonar)" is indicated on the "Communication Bus Check" screen of the Techstream.

    Refer to PROBLEM SYMPTOMS TABLE [11/2018 - ]

  • Communication system DTCs (DTCs that start with U) that correspond to "Clearance Warning ECU Communication Stop Mode" in "DTC Combination Table" are output.

    Refer to DTC COMBINATION TABLE [11/2018 - ]

  • Clearance warning ECU assembly branch line or connector
  • Power source circuit of clearance warning ECU assembly
  • Clearance warning ECU assembly ground circuit
  • Clearance warning ECU assembly