Installation [12/2013 - 11/2016]: Procedure

1. Install the rear seat inner belt assembly with the bolt.

   Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

   NOTE:

   Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the seatback frame.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Protruding Part

2. Pass the rear seat inner belt assembly through the rubber band of the rear seat cushion assembly as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Rubber Band

Refer to PROCEDURE - Step 39

Refer to INSTALLATION [12/2013 - ]