LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander XLE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Emission Control System (1AR-FE) (Service Information) (Except Hybrid)) >> Canister >> Components [11/2016 - ] >> Illustration

Components [11/2016 - ]: Illustration

WARNING: This page is about a different variant/trim than selected.
Fig 1: Canister Replacement Components With Torque Specifications (1 Of 2)
GTY442517Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Callout Description Callout Description
*1 TAIL EXHAUST PIPE ASSEMBLY *2 EXHAUST PIPE SUPPORT
*3 COMPRESSION SPRING *4 GASKET
N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part


Fig 1: Canister Replacement Components With Torque Specifications (2 Of 2)
GTY666652Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Callout Description Callout Description
*1 CHARCOAL CANISTER PROTECTOR *2 VENT LINE HOSE
*3 AIR LINE TUBE *4 PURGE LINE HOSE
*5 CHARCOAL CANISTER LEAK DETECTION PUMP SUB-ASSEMBLY *6 CANISTER (CHARCOAL CANISTER ASSEMBLY)
*7 NO. 1 CHARCOAL CANISTER FILTER *8 FUEL TANK VENT HOSE SUB-ASSEMBLY
N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part