LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander XLE, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Power Outlets (Interior) (Service Information) (Except Hybrid) >> Center Power Outlet Socket >> Removal [12/2013 - ] >> Procedure

Removal [12/2013 - ]: Procedure

  1. REMOVE CONSOLE BOX ASSEMBLY 

    Refer to REMOVAL [12/2013 - ]

  2. REMOVE NO. 2 CONSOLE BOX HOLE COVER 

    Refer to PROCEDURE - Step 1

  3. REMOVE NO. 1 TRASH BOX RETAINER SUPPORT 

    Refer to PROCEDURE - Step 5

  4. REMOVE CENTER POWER OUTLET SOCKET ASSEMBLY 
    1. Using a screwdriver, disengage the claw and remove the center power outlet socket assembly as shown in the illustration.
      GTY445080Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape

      HINT: 

      Tape the screwdriver tip before use.

  5. REMOVE CENTER POWER OUTLET SOCKET COVER 
    1. Disengage the 2 claws and remove the center power outlet socket cover.
      GTY437638Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals