Precaution [12/2013 - ]

WARNING:

Replace any faulty parts of the seat belt systems (outer belt, inner belt, bolts, nuts, adjustable shoulder anchor, tether anchor hardware and other related parts). When inspecting a vehicle that was in a collision, be sure to check all of the seat belt systems regardless of whether or not the system was activated in the collision. Replace any damaged or malfunctioning systems.

Fig 1: Testing Seat Belt

ROAD TEST (IN SAFE AREA)
WARNING:
Conduct this test in a safe area.
1. Fasten the front seat belts.
2. Drive the vehicle at 16 km/h (10 mph) and firmly depress the brake pedal. Check that the belts lock and cannot be extended at this time.
  If a belt does not lock, replace the seat belt assembly.
  
  Refer to REMOVAL [12/2013 - ]
  
  HINT:
  
  Inspect the seat belt assembly before installing it.
  
  See step 1