LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System (Service Information) (Except Hybrid) (2 Of 2) >> Air Conditioning Amplifier >> Installation [12/2013 - ] >> Procedure

Installation [12/2013 - ]: Procedure

  1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY 
    1. Engage the 2 guides to temporary install the air conditioning amplifier assembly.
    2. Install the air conditioning amplifier assembly with the 2 screws.
    3. Connect each connector.
  2. INSTALL ECU INTEGRATION BOX RH 

    Refer to PROCEDURE - Step 2

  3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 9

  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 10

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH 

    Refer to PROCEDURE - Step 11

  6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH 

    Refer to PROCEDURE - Step 63 , or refer to PROCEDURE - Step 64 , or refer to PROCEDURE - Step 63

  7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 54 , or refer to PROCEDURE - Step 55 , or refer to PROCEDURE - Step 54

  8. INSTALL FRONT DOOR SCUFF PLATE RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 55 , or refer to PROCEDURE - Step 56 , or refer to PROCEDURE - Step 55

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [12/2013 - 11/2016] , or refer to INITIALIZATION [11/2016 - ]

scientia non olet · About LEMON Manuals