Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.

HINT:

Check each bearing position and installation direction.

Fig 1: Exploded View Of Bearing Position And Installation Direction (1 Of 2)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Exploded View Of Bearing Position And Installation Direction (2 Of 2)

Mark	Front Race Diameter Inside / Outside [mm (in.)]	Thrust Bearing Diameter Inside / Outside [mm (in.)]	Rear Race Diameter Inside / Outside [mm (in.)]
A	-	57.7 (2.27) / 75.2 (2.96)	-
B	-	29.1 (1.15) / 48.6 (1.91)	30.7 (1.21) / 48.3 (1.90)
C	-	62.6 (2.46) / 82.4 (3.24)	65.9 (2.59) / 82.3 (3.24)
D	59.4 (2.34) / 76 (2.99)	53.46 (2.10) / 79 (3.11)	-
E	-	56.1 (2.21) / 81.1 (3.19)	-
F	-	61.2 (2.41) / 79 (3.11)	-
G	-	28 (1.10) / 47.1 (1.85)	26.1 (1.03) / 44 (1.73)
H	52.2 (2.06) / 70.4 (2.77)	48.9 (1.93) / 72.0 (2.83)	-