LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Automatic Transmission (U760E) - Diagnostics - Introduction (Except Hybrid)) >> Automatic Transaxle System >> Registration [12/2013 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • When the automatic transaxle is replaced, the transaxle compensation code must be input into the ECM (proceed to Procedure 1). After the automatic transaxle is reinstalled, the Quick Response (QR) code label will be positioned where the code cannot be read. Therefore, before reinstalling the automatic transaxle, record the transaxle compensation codes or input them in the Techstream.
  • When the ECM is replaced, the existing transaxle compensation codes must be input into the new ECM (proceed to Procedure 2).
scientia non olet · About LEMON Manuals