LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (U760E) - Service Information (1 Of 2)) >> Transmission Wire >> Removal [11/2016 - ] >> Procedure

Removal [11/2016 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to REMOVAL [11/2016 - ] 

  2. REMOVE TRANSMISSION WIRE 
    1. Disconnect the transmission revolution sensor connector.
      GTY304937Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 7 shift solenoid valve connectors.
    3. Disengage the transmission wire clamp.
    4. Remove the bolt and lock plate and separate the temperature sensor from the transmission valve body assembly.
    5. Remove the bolt, lock plate and transmission wire from the transmission valve body assembly.
      GTY308029Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals