LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (U760E) - Service Information (1 Of 2)) >> Pattern Select Switch >> Installation [12/2013 - ] >> Procedure

Installation [12/2013 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL PATTERN SELECT SWITCH ASSEMBLY 
    1. Engage the 2 claws and install the pattern select switch assembly to the No. 1 switch hole base.
  2. INSTALL NO. 2 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 20

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  4. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH 

    Refer to PROCEDURE - Step 5

  5. INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH 

    Refer to PROCEDURE - Step 6

  6. INSTALL FRONT PANEL GARNISH RH 

    Refer to PROCEDURE - Step 7

  7. INSTALL FRONT PANEL GARNISH LH 

    Refer to PROCEDURE - Step 8

  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 9

scientia non olet · About LEMON Manuals