LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Starting System (1AR-FE) (Service Information) (Except Hybrid)) >> Ignition Switch >> Removal [12/2013 - ] >> Procedure

Removal [12/2013 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE STEERING COLUMN ASSEMBLY 

    Refer to REMOVAL [12/2013 - ]

  2. REMOVE UPPER STEERING COLUMN BRACKET WITH SWITCH ASSEMBLY 

    Refer to PROCEDURE - Step 2

  3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Remove the 2 screws and ignition or starter switch assembly from the upper steering column bracket assembly.
      GTY444073Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals