LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Starting System (1AR-FE) (Service Information) (Except Hybrid)) >> Ignition Switch >> Installation [12/2013 - ] >> Procedure

Installation [12/2013 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Install the ignition or starter switch assembly to the upper steering column bracket assembly with the 2 screws.
  2. INSTALL UPPER STEERING COLUMN BRACKET WITH SWITCH ASSEMBLY 

    Refer to PROCEDURE - Step 12

  3. INSTALL STEERING COLUMN ASSEMBLY 

    Refer to INSTALLATION [12/2013 - ]

scientia non olet · About LEMON Manuals