LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Fuel System (1AR-FE) (Service Information) (Except Hybrid)) >> Fuel Sender Gauge Assembly >> Removal [12/2013 - ] >> Procedure

Removal [12/2013 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY 

    Refer to REMOVAL [12/2013 - ] 

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY 
    1. Disconnect the fuel sender gauge assembly connector.
      GTY452967Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Pull Up
    2. Disengage the claw of the fuel sender gauge assembly, and then pull up the fuel sender gauge assembly to remove it.
      NOTE:
      • Do not touch the resistance plate or contacts of the fuel sender gauge assembly.
      • Do not bend the arm of the fuel sender gauge assembly.
scientia non olet · About LEMON Manuals