Installation [12/2013 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- INSTALL FUEL SENDER GAUGE ASSEMBLY
- Slide the fuel sender gauge assembly downwards and engage the claw to install it.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
 |
Slide |
NOTE:
- Do not touch the resistance plate or contacts of the fuel sender gauge assembly.
- Do not bend the arm of the fuel sender gauge assembly.
- Connect the fuel sender gauge assembly connector.
- INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to INSTALLATION [12/2013 - ]