LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Fuel System (1AR-FE) (Service Information) (Except Hybrid)) >> Fuel Pressure Regulator >> Installation [12/2013 - ] >> Procedure

Installation [12/2013 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY 
    1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.
    2. Install the fuel pressure regulator assembly to the fuel filter.
  2. INSTALL FUEL PUMP 

    Refer to REASSEMBLY [12/2013 - ] 

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY 

    See step  2

  4. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY 

    Refer to INSTALLATION [12/2013 - ] 

scientia non olet · About LEMON Manuals