Removal [12/2013 - 11/2016]: Procedure
WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to REMOVAL [12/2013 - 11/2016]
- REMOVE FUEL SENDER GAUGE ASSEMBLY
See step 2
- REMOVE FUEL PUMP
Refer to DISASSEMBLY [12/2013 - 11/2016]
- REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
- Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly from the fuel filter.NOTE:
Slowly pull out the fuel pressure regulator assembly because the O-rings are firmly installed between the fuel pressure regulator assembly and fuel filter.
- Remove the 2 O-rings from the fuel pressure regulator assembly.
*1 O-ring
- Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly from the fuel filter.