Inspection [12/2013 - 11/2016]: Procedure
WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT HEATED OXYGEN SENSOR
- Measure the resistance according to the value(s) in the table below.
*A for Bank 1 *B for Bank 2 *a Component without harness connected
(Heated Oxygen Sensor)Standard Resistance
Tester Connection Condition Specified Condition 2 (HT1B) - 1 (+B)
1 (HT2B) - 2 (+B)20°C (68°F) 11 to 16 Ω 2 (HT1B) - 3 (E2)
1 (HT2B) - 4 (E2)Always 10 kΩ or higher If the result is not as specified, replace the heated oxygen sensor.
- Measure the resistance according to the value(s) in the table below.