LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Control System (2GR-FE) (Service Information) (Except Hybrid)) >> Heated Oxygen Sensor >> Components [12/2013 - 11/2016] >> Illustration

Components [12/2013 - 11/2016]: Illustration

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heated Oxygen Sensor Replacement Components With Torque Specifications
GTY442405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Callout Description Callout Description
*1 FRONT FLOOR COVER LH *2 HEATED OXYGEN SENSOR (for Bank 2)
*3 HEATED OXYGEN SENSOR (for Bank 1) *4 WIRE HARNESS CLAMP BRACKET
N*m (kgf*cm, ft.*lbf): Specified torque * For use with SST
scientia non olet · About LEMON Manuals