LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Automatic Transmission (U660F) - Diagnostics - Introduction (Except Hybrid)) >> Automatic Transaxle System >> Registration [12/2013 - 11/2016] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When the automatic transaxle is replaced, the transaxle compensation code must be input into the TCM (proceed to Procedure 1). After the automatic transaxle is reinstalled, the Quick Response (QR) code label will be positioned where the code cannot be read. Therefore, before reinstalling the automatic transaxle, record the transaxle compensation codes or input them in the Techstream.
  • When the TCM is replaced, the existing transaxle compensation codes must be input into the new TCM (proceed to Procedure 2).
scientia non olet · About LEMON Manuals